Su carrito de compras está vacío
 
English Polski Spanish 
Buscar un manual
 

(p.Ej. AA-V20EG JVC, ZX-7 Sony)
PayPal 1000+ rating Secure, Encrypted Checkout.
 
Usuarios conectados
Actualmente hay 5797 visitantes online.
Productos
Información
Destacado
Inicio >> SONY >> CDPCX691 Manual de Servicio
 
 0 artículo(s) en Su carrito 

SONY CDPCX691
Manual de Servicio


¡Twitee acerca de este producto y obtenga $1.00 de crédito en la tienda para uso!
  • Contiene diagramas del circuito
  • Descargable
  • Formato PDF
  • Manual completo
  • Idiomas: English
Precio: $4.99

Descripción del SONY CDPCX691 Manual de Servicio

Manual de servicio completo en formato digital (archivo PDF). Los manuales de servicio por lo general contienen diagramas de circuitos, tarjetas de circuitos impresos, consejos para reparación, diagramas de cableado, diagramas de bloque y lista de refacciones. El Manual de Servicio (a veces llamado Manual de Reparación) es usado principalmente por los técnicos.

Si tan solo quiere saber cómo utilizar su televisión, reproductor de vídeo, reproductor de mp3, etc. Quizá lo que necesita es el Manual del Propietario. Después de colocar la orden le enviaremos las instrucciones de descarga a su dirección de e-mail.

The manual is available in languages: English

Not yet ready
You must purchase it first

Opiniones de los clientes
No hay comentarios de productos.

TEXT_PDF_SNIPPET
Disc Sensor Adjustment Be sure to perform this adjustment after sensor adjustment in MECHANICAL ADJUSTMENT. Connection:
MAIN board CN506 D.S GND T.P D.S: Pin 1 T.P: Pin 3 GND: Pin 2 oscilloscope

5. Rotate the DISC/CHARACTER knob in the counterclockwise direction and the disc table starts to rotate in the same direction. Check that the waveform at this time is the same as that in step 4. If larger by a considerable extent, rotate the DISC/CHARACTER knob in the clockwise direction and the disc table starts to rotate in the same direction. Repeat from step 4. 6. Rotate RV501 of the MAIN board and adjust so that the H and L portions of the D.S waveform become the same.

Waveform:
D.S

D.S
Adjust so that these widths become the same.

Adjustment Location: MAIN board
P.T

1. Connect the oscilloscope to Pins 1, 2, and 3 of CN506 of the MAIN board. 2. Check that no discs are loaded in the unit. 3. With the power ON, while pressing the GROUP 5 and § OPEN/CLOSE buttons, press the +100 button. The disc table starts to rotate in the clockwise direction. 4. Loosen the fixing screw, move the mounting board (SENSOR), and secure the mounting board (SENSOR) at the point the H portion of the P.T waveform comes the center of the H portion of the D.S waveform.
Fixing screw Mounting board (SENSOR)

D.S

P.T

Should be at the center

� 18 �

Quizás también quiera comprar

$4.99

CDPCX691 SONY
Manual de Usuario

Manual del propietario completo en formato digital. El manual estará disponible para descarga como …
>
Parse Time: 0.282 - Number of Queries: 100 - Query Time: 0.08