Alignment Between Arm (A - L) Assy and Arm (B - L) Assy
Arm (A - R) Assy, Arm (B - R) Assy
Cam (R)
DIAGRAMS
IC Pin Descriptions
Block Diagram - CD Section
Block Diagram - Tuner Section
Block Diagram - Display Section
Circuit Boards Location
Printed Wiring Boards - CD Mechanism Section
Schematic Diagram - CD Mechanism Section (1/2)
Schematic Diagram - CD Mechanism Section (2/2)
Printed Wiring Boards - Main Section
Schematic Diagram - Main Section (1/4)
Schematic Diagram - Main Section (2/4)
Schematic Diagram - Main Section (3/4)
Schematic Diagram - Main Section (4/4)
Printed Wiring Board - Sub Section
Schematic Diagram - Sub Section
Printed Wiring Board - Display Section
Schematic Diagram - Display Section
EXPLODED VIEWS
Chassis Section
Front Panel Section
CD Mechanism Section (1)
CD Mechanism Section (2)
CD Mechanism Section (3)
ELECTRICAL PARTS LIST
Opiniones de los clientes
No hay comentarios de productos.
TEXT_PDF_SNIPPET
SECTION 3 PHASE ALIGNMENT
3-1. ARM (A-L) ASSY, ARM (B-L) ASSY
4 arm (A-L) assy
5 stop ring 1.5, type-E
2 stop ring 1.5, type-E 1 arm (B-L) assy
3 spring (arm L)
bracket (L) assy
3-2. CAM (L)
1 Move the arm (B-L) assy in the direction of the arrow A and the arm (A-L) assy in the direction of the arrow B fully (full open state). 2 Align the hole on the cam (L) with part C and install the cam. 4 Turn the cam (L) clockwise and counterclockwise to verify that both the arms are operated. 3 stop ring 1.5, type-E
