|
No hay comentarios de productos.
Getting Started Step 3: Attaching the rear cover
After connecting the computer and power cord, attach the supplied rear cover. Make sure that you keep the screen upright when attaching or detaching the rear cover.
Getting Started Getting Started 3
Turn the screw to fasten the rear cover.
3
Connect the video signal cable and AC adapter cord to the monitor.
6
Turn the screw to fasten the rear cover.
1
Clamp the AC adapter cord.
Align the marking tape of the AC adapter cord to the clamp, wind it once and close the clamp.
4
Clamp the AC adapter cord.
Align the marking tape of the AC adapter cord to the clamp, wind it once and close the clamp. Unlocked Locked
Unlocked Clamp Marking tape of the AC adapter cord
Locked
GB F D ES I
7 Using the monitor without the stand
Prepare: Philip�s screw driver Soft cloth to place under the LCD panel
Clamp Marking tape of the AC adapter cord
Attach the rubber pads to the bottom of the monitor. After attaching the rubberpads, which prevent slipping, stand the monitor up.
2
Press the rear cover against the part for attaching the cover.
1-3
1
Remove the screws from the fixing shaft of the stand.
5
Press the rear cover against the part for attaching the cover.
Peel off
2
Place the monitor on the soft cloth with the LCD panel facing down, and pull the stand out from the monitor.
8
9
|
