Su carrito de compras está vacío
 
English Polski Spanish 
Buscar un manual
 

(p.Ej. AA-V20EG JVC, ZX-7 Sony)
PayPal 1000+ rating Secure, Encrypted Checkout.
 
Usuarios conectados
Actualmente hay 6043 visitantes online.
Productos
Información
Destacado
Inicio >> SONY >> MDRIF5000 Manual de Servicio
 
 0 artículo(s) en Su carrito 

SONY MDRIF5000
Manual de Servicio


¡Twitee acerca de este producto y obtenga $1.00 de crédito en la tienda para uso!
  • Contiene diagramas del circuito
  • Descargable
  • Formato PDF
  • Manual completo
  • Idiomas: English
Precio: $4.99

Descripción del SONY MDRIF5000 Manual de Servicio

Manual de servicio completo en formato digital (archivo PDF). Los manuales de servicio por lo general contienen diagramas de circuitos, tarjetas de circuitos impresos, consejos para reparación, diagramas de cableado, diagramas de bloque y lista de refacciones. El Manual de Servicio (a veces llamado Manual de Reparación) es usado principalmente por los técnicos.

Si tan solo quiere saber cómo utilizar su televisión, reproductor de vídeo, reproductor de mp3, etc. Quizá lo que necesita es el Manual del Propietario. Después de colocar la orden le enviaremos las instrucciones de descarga a su dirección de e-mail.

The manual is available in languages: English

Not yet ready
You must purchase it first

Opiniones de los clientes
No hay comentarios de productos.

TEXT_PDF_SNIPPET
SECTION 3 ELECTRICAL ADJUSTMENTS
Notes: 1. These adjustments are performed in the order that they are discribed. 2. Adjustment and measurement are performed for each channel unless otherwise specified. 3. Adjustment is made for right channel first and then the left channel. 4. The power voltage at the headphones section is supplied with 1.2 V. 5. The processor section is used as jig to adjust the headphones section (MDR-IF5000). 6. Adjustment is made with the RX SW board and RX PD1 and RX PD2 boards (for both L-ch and R-ch) connected to the RX board with wires (normal part). Adjustment Location:
� RX board (component side) �

TP9 TP11

0 dB=0.775 V
Tuning Adjustment Preparation:
processor (DP-IF5000) headphones (MDR-IF5000)
TUNING ADJUSTMENT (R-ch) L54 L55 TUNING ADJUSTMENT (L-ch) L34 L35

1. Set the processor section (DP-IF5000) in test mode and operate the set to generate a signal of 1 kHz and �10 dB. (Refer to DP-IF5000 service manual page 7.) 2. Supply 1.2 V to between VCC and ground on the RX board. 3. Adjust RV11 (volume control) on the RX board to the minimum level. Setting:
distortion meter

RX board TP11 (L-ch) TP9 (R-ch)

+ �

1. Connect a distortion meter to TP11 (L-ch) and TP9 (R-ch) on the RX board. 2. Adjust L34 and 35 for L-ch and L54 and 55 for R-ch on the RX board so that the reading on the distortion meter is minimized.

�6�

Quizás también quiera comprar

$4.99

MDR-IF5000 SONY
Manual de Usuario

Manual del propietario completo en formato digital. El manual estará disponible para descarga como …
>
Parse Time: 0.207 - Number of Queries: 101 - Query Time: 0.041